Lightsaber Bluetooth Connection Tutorial V1.4

Table of Contents

SN Pixel V4 Pro (SNV4 Pro) APP Operation Guide

Click here to download the SNV4 Pro guide

1. Download and Install the APP

a) For Android System: Scan the QR code to download.

ForcePark v2

b) For iOS System: Search "ForcePark V2" in the App Store to download.

2. Bluetooth Connect

Turn on Bluetooth and Location Services on your phone, then open the APP.

a) Tap the Bluetooth icon in the toolbar to connect.

ForcePark V2

b) After tapping the Scan button, select the detected device (Bluetooth device name: FORCEPARK) for Bluetooth connection. Once connected successfully, there will be a voice prompt from the saber.

ForcePark V2

3. Control the saber

Control various functions of the saber through the APP.

ForcePark V2

4. Replace Sound Fonts(Read SD card information for operation)

Replacement method:

*Remove battery - Remove SD card - Import sound effects - Install SD card - Install battery - Restart

*The maximum number of soundfount files that an SD card can store is 99 sets. The maximum number of soundfount that can be Mark for the APP is 25 sets.

*If the soundfount file name is 1-25, there is no need to mark it on the app. If the soundfount file name is 26-99, it needs to be marked on the APP.

Simple Replacements:

SNV4 Pro is compatible with Proffie sound fonts (with very few exceptions). All you need to do is to rename the Proffie sound font folder with a numerical designation from 1 to 99. However, the track file name must be in the format trackxx.wav, such as track1.wav.

Complex Replacements:

*The folder name of the sound font file should be numbered from 1 to 99.

*The types of sound effects include humxx.wav, blstxx.wav, clshxx.wav, forcexx.wav, stabxx.wav, etc., where xx ranges from 01 to 09 (e.g., hum01.wav), or from 1 to 15 (e.g., hum1.wav), or left empty (hum.wav).

*The names of corresponding sound fonts must be placed directly in the main folder (e.g., 1:/hum01.wav) or in sub-folders with corresponding names established (e.g., 1:/hum/hum01.wav).

5. Blade Effects Editing

a) Local Blade Effects:

*Clicking to play, it will display the actual effects on the saber.

*Blade effects within the "Local Blade Effects" can be designated as available effects for the saber by marking them with a "star"

*If the number of "star" light effects in the "Local Blade Effects" exceeds the maximum limit, the system will issue a warning.

*Blade effects uploaded from the "Public Blade Effects" and "My Blade Effects" will be saved into "Local Blade Effects" after clicking upload button.

ForcePark V

b) Public Blade Effects:

*Running blade effects can be viewed on the APP.

*Any public blade effects can be uploaded to the "Local Blade Effects".

ForcePark v2

c) My Blade Effects:

*Register an account on the website www.saberopen.com.

*Log in to the APP with the registered account. Edited blade effects will automatically be saved to "My Blade Effects".

*Users can select preferred blade effects from "My Blade Effects", then click "upload" to find the newly uploaded blade effects in the "Local Blade Effects" Area.

ForcePark v2

6. Parameter Adjustment

ForcePark V2

a) Volume Adjustment

b) Power On/Off Speed Adjustment

c) Blade Light Length Adjustment

d) Color Palette

e) Motion Sensitivity Adjustment

7. Other APP Settings

ForcePark v2

a) Restore Settings

b) APP Version Information Check

c) Clash On/Off

d) Motion Control On/Off

e) Swing On/Off

f) Hum On/Off

8. Add Blade Effects via Computer

a) Create a folder named "filexx" (where xx ranges from 1 to 90) under the "all-light" directory.

b) Rename the downloaded blade effect file on the computer to "light1.bin".

c) Place the blade effect file and "readme" file into the newly created "filexx" folder.

9. Upgrade SD Card Program

Place the upgrade file provided by the official into the root directory (upgrade file named sword2022.bin). Then insert the SD card and the battery. When you hear the sound of metal impact, it indicates that the board upgrade is complete.

ForcePark v2

10. Warning!

a) Both ''power on'' and ''set'' are system files and must not be deleted or altered!

b) Files named ''file91'' to ''file99'' within the ''all-light’' folder are system light effect files and must not be deleted or altered!

c) The system can only recognize 44.1 kHz mono-channel WAV audio file. Other formats may cause abnormal playback or even system errors!

SN Pixel V4(SNV4) APP Operation Guide

WARNING:Only S-RGB and SN Pixel v4 cores of the lightsaber can connect to Bluetooth)

1. SN Pixel V4 (SNV4) Bluetooth Connect

1.1 Scan the code to download APP and install it. (Or search for “ForcePark” in Google play & Apple store)

QR code

1.2 Turn on your phone's Bluetooth and enter the APP for operation

(a) Click the Bluetooth icon

Bluetooth Operation Guide 01

(b) click the Scan button   

Bluetooth Operation Guide 02    

1.3 Connect the lightsaber to turn on Bluetooth, then control the lightsaber and adjust the parameters of the lightsaber

(Note: Install the blade before using the Bluetooth function)

(a) Connect the lightsaber Bluetooth (in standby mode)

Bluetooth Operation Guide 03

(b) control the plate to operate the lightsaber

Bluetooth Operation Guide 04
(C) adjust the lightsaber parameters
Bluetooth Operation Guide 05

2. SD card Settings

Remove the SD card from the lightsaber and open it on your computer using the SD card reader

2.1 Upgrade the lightsaber program

(a) Replace the existing ota files on your SD card with new ota files

(b) Loading the SD card back into the lightsaber will have an update tone (Upgrade start)

(c) Wait for the Upgrade completion tone to prompt you to complete the upgrade (Upgrade success)

2.2 Customize the lightsaber parameters

(a) Open the set folder in your SD card and find the config file for editing

(you need to delete the config file from all the folders in your SD card except the set folder before editing)

(b) Main Edge light length setting

PixelNumber=132 (can be set to a value between 0-144)

(c) Main Edge light length setting

SubPixelNumber=132 (can be set to a value between 0-144)

(d) Side edge delay time setting

SubBladeDelay=200

(e) Horn sound effect volume set

MixerVolumeMax=4500 (can be set to a value between 0-4500)

(f) Impact sensitivity setting

ClashSensitivity=10 (can be set to a value between 0-10)

(g) Turn the switch machine setting

TwistPwrOn=1 (1 for on,0 for off)

TwistPwrOff=1 (1 for open,0 for closed)

(h) Turn the switchgear sensitivity setting

TwistSensitivity=5 (can be set to a value between 0-10)

(i) Wave the power on setting

SwingPwrOn=1 (1 for on,0 for off)

(j) Wave the power On sensitivity setting

SwingPwrOnSensitivity=6 (can be set to a value between 0-10)

(k) Single sound effect with default blade color, light effect and boot light effect

Bluetooth Operation Guide 06

2.3 Custom sound effects

Make sure the sound files in the audio folder you replace or add are

in the following format: xxx (x).wav

Shoot blst (x).wav

Hit clsh (x).wav

drag the sword drag (x).wav

Sound effect switch Sound font (x).wav

Background hum (x).wav

Boot in (x).wav

Spell sword lock (x).wav

Power off out (x).wav

Wave swingh (*).wav swingl (*).wav

bgm track (*).wav

(a) Alternate sound effects

Change the name of the new sound pack to the name of the sound pack you

want to replace and replace the original sound pack

(b) Delete sound effects

Delete the sound effects you want to delete directly

(c) Add sound effects

Put the added new sound pack directly into the SD card